TOMBO NO.9038 G-Flon Packing

TOMBO NO.9038 G-Flon Packing -------------------------------------------- ? Application All types of pumps, mixers, etc. ? Fluid Water base fluids ( water, waste water, brine etc.) , oil base fluids, organic solvents, hydrocarbons, chemicals, corrosive fluids except listed below TOMBO No.9038 can not be used for strong oxidizing acids such as fuming sulfuric acid, concentrated sulfuric acid, chromic acid, aqua legia etc. This packing is not used for the fluids which contamination is not allowed, such as drinking water, pharmaceuticals, comestibles, semi-conductor manufacturing etc. ? Features 1. Graphite particles containing PTFE yarn is excellent in chemical resistance and can be used with almost any fluids other than strong oxidizing acids. 2. Excellent in seal performance at high revolution speeds. 3. Because it contains graphite particles in PTFE yarn, heat dispersion characteristics are very good and among PTFE base packings, it has the highest heat resistance. ? Construction Graphite particles containing PTFE yarn is treated with PTFE dispersion and special lubricant, and then braided into square cross section and further treated with PTFE dispersion. ? Standard size and weight TOMBO No. Nominal size( mm) 3.2 4.8 6.4 7.9 9.5 11.1 12.7 14.3 15.9 17.5 19.0 22.2 9038 Weight ( kgs) Braiding method Supply form 0.06 0.11 0.18 0.28 0.41 0.55 0.72 0.92 1.12 1.59 2.17 * Weight is per coil and reference only. Molded ring is also available. 3 meter / coil. ? Service Range Max. Temperature Max. Pressure Max. Velocity 2MPa 16meter/ sec 260 Max. PV Value 15MPa m/ sec pH 0 ^ 14