Detail TOMBO NO.9038 G-Flon Packing
TOMBO NO.9038 G-Flon Packing
--------------------------------------------
? Application
All types of pumps, mixers, etc.
? Fluid
Water base fluids ( water, waste water, brine etc.) , oil base
fluids, organic solvents, hydrocarbons, chemicals, corrosive
fluids except listed below
TOMBO No.9038 can not be used for strong oxidizing
acids such as fuming sulfuric acid, concentrated sulfuric
acid, chromic acid, aqua legia etc.
This packing is not used for the fluids which contamination
is not allowed, such as drinking water, pharmaceuticals,
comestibles, semi-conductor manufacturing etc.
? Features
1. Graphite particles containing PTFE yarn is excellent in
chemical resistance and can be used with almost any
fluids other than strong oxidizing acids.
2. Excellent in seal performance at high revolution speeds.
3. Because it contains graphite particles in PTFE yarn, heat
dispersion characteristics are very good and among PTFE
base packings, it has the highest heat resistance.
? Construction
Graphite particles containing PTFE yarn is treated with PTFE
dispersion and special lubricant, and then braided into square
cross section and further treated with PTFE dispersion.
? Standard size and weight
TOMBO No. Nominal size( mm) 3.2 4.8 6.4 7.9 9.5 11.1 12.7 14.3 15.9 17.5 19.0 22.2
9038
Weight ( kgs)
Braiding method
Supply form
0.06 0.11 0.18 0.28 0.41 0.55 0.72 0.92 1.12
1.59 2.17
* Weight is per coil and reference only. Molded ring is also available.
3 meter / coil.
? Service Range
Max. Temperature
Max. Pressure
Max. Velocity
2MPa
16meter/ sec
260
Max. PV Value 15MPa m/ sec
pH 0 ^ 14
Tampilkan Lebih Banyak